Comments on: GE helps Houston homes “talk” to the Smart Grid

By: Roy Piskadlo

Roy Piskadlo — Sat, 07 Jan 2012 18:13:12 +0000

Digital Timer #15091…..Will it operate correctly after a 12 hour power failure? I have a vacation house I leave for 3 months at a time. I had a unit that worked for years from another manufacturer which has quit after 15 years.

Many thanks

Roy Piskadlo
[address redacted]

By: Mike

Mike — Sun, 11 Dec 2011 20:33:13 +0000

Two GE wall timer model, # 15071 was just recently purchased at The Home Depot. Both are currently malfunctioning. The timers, connected to incandescent and CFL loads, will operate intermittently by turning on outside their off program setting or turning off during their on program setting.

I’m an licensed electrician with 42 years of experience wiring devices and can assure you the timer are wired correctly, programmed correctly and connected to appropriate loads.

What is causing it and can you send me two new units? Thank you.

Mike Crowley

By: J Redus

J Redus — Sun, 11 Dec 2011 19:20:35 +0000

I need instructions to set my 15071 Smart Digital timer, referenced above. there are other queries about this also. Please send a link to instructions so I can get it working again after a power failure. Thank you.

By: Steve Fox

Steve Fox — Tue, 13 Sep 2011 23:20:36 +0000

I have a 4 year old SxS refrigerator which keeps getting warmer inside. The coils freeze-up and I’m told that I need to replace the motherboard…can this be the only problem because it will cost around $300 to replace and i would like to avoid this exspence on a fairly-new appliance – thanks

By: Hal

Hal — Sun, 20 Mar 2011 03:00:04 +0000

It looks like I am not alone, I need instructions to set me 15071 Digital timer. Please send a link to instructions so I can get it working again.
Thank You!

By: Judy Chernak

Judy Chernak — Tue, 08 Mar 2011 00:54:45 +0000

By: SAM ZAGORIA

SAM ZAGORIA — Sun, 23 Jan 2011 17:37:23 +0000

What’s the answer to Rod Olsen. I have the same problem. SZagoria@bellsouth.net

By: Sue DeMong

Sue DeMong — Mon, 10 Jan 2011 00:04:45 +0000

The normal wash cycle is lasting 81 minutes and the drying cycle is on energy saver so is not being used. Per manual this cycle should only take 65 minutes. Is this something we can correct ourselves?

By: rod olsen

rod olsen — Fri, 23 Jul 2010 01:15:09 +0000

timer has stopped working…………….lights won’t come on………………instruction sheet does not have any trouble shooting guidelines……….help!!!

By: philip

philip — Sun, 07 Feb 2010 18:59:27 +0000

561-3023266 looking to see how to t\set the timer
GE Indoor In-Wall Smart Digital Timer

Model # 15071 Internet/Catalog # 100685868
Store SKU # 543476 me help please